Operation Buttons - Mitsubishi Electric DX-TL950E Installation And Operation Manual

Major operations and their functions (continued)
Front View (Inside of the door) (continued)
ACCESS
POWER
SPLIT/
SEQUENCE
VIDEO OUT AUDIO OUT
17
19. COPY button
Press this button to display <COPY> menu. This
button lights when performing copy operation. Cop-
ies cannot be made when a card is not in the
COMPACT FLASH slot.
20. ALARM INTERRUPT button
When pressing this button, the unit will not accept
alarm signals or motion detection for 5 minutes. Dur-
ing this time, the button will flash.
21. WARNING RESET button
This button is used to clear on-screen warning dis-
play and clear data.
22. SET UP button
Press this button to display the <SETTINGS> menu.
23. SEARCH button
Press this button to display the <SEARCH > menu.

24. OPERATION buttons

STOP button
Press to stop playback.
PAUSE / SHUTTLE HOLD button
When pressing this button during playback, the unit
switches to still frame playback and the button lights.
When pressing this button again, the unit resumes
playback and the button turns off. When pressing
this button during shuttle playback, the set playback
speed is maintained even when letting go of the
SHUTTLE ring. (SHUTTLE HOLD)
REV. PLAY (REVERSE PLAY) button
When pressing this button, the unit switches to re-
verse playback and the button lights.
PLAY button
When pressing this button, the unit starts playback
and the button lights.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
12
1 2 3 4 5
ZOOM / 0
OUTPUT B COM
OUTPUT
A/B
COMPACTFLASH
18
6 7 8 9
PRE ALARM M-DET EMERGENCY LOCK
ALARM
WARNING
COPY SET UP
INTERRUPT
RESET
19 20 21 22 23
PLAY MODE buttons
The playback interval can be changed during nor-
mal and reverse playback by pressing PLAY(+) or
REV. PLAY( - ).
REC/STOP
CLEAR/
REW
TIMER
SEARCH STOP PAUSE REV. PLAY PLAY
PLAY
SHUTTLE
HOLD MODE
24
ENTER/
FF