Video Loss - HIKVISION iVMS-4200 User Manual

9.1.7 Video Loss

To configure the video loss detection function of the stream, please check
[Enable Video Loss Detection] in the Tampering configuration interface (Figure
9-10), and select a time schedule for the video loss detection to take effect. The
schedule template can be edited in the Schedule configuration interface.
[Actions] lists all the valid actions linked by video loss detection. Check the
actions that required to be done after video loss detection is triggered.
[Audio Warning]: trigger audio warning on the device when video loss detection is
triggered.
[Upload to Center]: upload alarm information to the CMS software when video
loss detection is triggered.
[Trigger Alarm Output]: activate 1 or multiple channels of alarm output when
video loss detection is triggered. Users need to specify the corresponding alarm
output channel (s) in the alarm output channel list.
[Email Linkage]: send an Email when video loss detection is triggered. The email
account settings are under "System Options" of the control panel. Please refer to
Chapter 13 "System Options" for more detail.
[Warning on Monitor]: display warning on the local video output on the
corresponding device of the selected stream.
After all the video loss detection settings are done, click
changes.
© 2006-2010 by HIKVISION. All rights reserved.
iVMS-4200 Quick Start Guide
50
to save the