iVMS-4200 Quick Start Guide
4. Stream Management
Before any operations, users need to add a device and configure it. Click
to enter the device configure mode, and then click Add to manage the
device.
4.1 Add Device
iVMS-4200 is able to automatically search all the on-line devices within the same
gateway. You can add a device either by selecting the listed online device or by
manually inputting the name, IP address, port, user name and port of the device
(Figure3-6).
Figure 3-6 DVR Management - Add DVR
After added the device according to the above steps, click Config to enter the
Device Parameters configuration interface (Figure 3-7). User is allowed to view and
configure the following settings: Status, General, Channels, Network, Alarm, User,
© 2006-2010 by HIKVISION. All rights reserved.
12