Displaying the time remaining for a cooking zone
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
The acoustic signal stops
Automatic switch off
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and
the cooking surface switches off
Tips on cooking and frying
Information on acrylamides
According to the latest scientific knowl-
edge, intensive browning of food,
especially in products containing starch,
can constitute a health risk due to acryla-
mides. Therefore we recommend cook-
ing at the lowest possible temperatures
and not browning foods too much.
• You can recognise good cookware from
the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with
aluminium or copper bottoms can leave
discolorations on the glass ceramic sur-
face which are difficult or impossible to
for the cooking zone
Pilot light of the cooking zone selected
flashes faster. The time remaining is
The acoustic signal to acknowledge
• If all cooking zones are switched off, the
cooking surface automatically switches it-
self off after approx. 10 seconds.
• If one of the cooking zones is not switched
off after a certain time, or if the heat setting
is not modified, the relevant cooking zone
switches off automatically.
played. Before being used again, the
cooking zone must be set to
Switches off after
Always place cookware on the cooking
zone before it is switched on.
Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat.
If possible, always place lids on the