Volvo XC60 User Manual page 54

03 Planning your trip
Avoiding an area
Entering areas on the map
03
Settings Route options
specified areas Selected
Use the navigation control to move the mid-
point of the cross hairs to the center of the area
to be avoided.
The name of the place at which the mid-point
of the cross hairs is pointing will be displayed
at the bottom of the map. The rectangle shows
the size of the area.
1. Press ENTER to access the sub-menu.
2. Select alternatives and press ENTER.
Scale
Enter the size of the map to be displayed of the
area to be avoided.
Set area to avoid
Save the specified area.
54
Adjust size
•
Change the size of the area using the
navigation control.
•
Press BACK to undo a change.
Adjust area
•
Move to a new area using the navigation
control.
•
Press BACK to undo a move.
Saved areas to be avoided
Settings
Avoid
specified areas
Map
Select which of the previously saved areas are
to be avoided when a route is calculated.
These are marked with an X.
1. Select an area with
2. Mark or unmark an area using
OK
Activate areas marked with an X. The activated
areas will be shown on the map.
Cancel
Undo any changes and return to
options .
Route options Avoid
Selected Map
or .
or .
Route