Page 1
+ Sleep alarm clock app iHome + Radio internet radio app Questions? Visit www.ihomeaudio.com App-enhanced Color Changing Alarm Clock Radio for Your iPhone / iPod Model iA17 download QR code reader app and scan...
Controls and indicators iA17 Quick Start Display / Installing/Replacing the Clock Backup Battery Setting up the Time Using Time Sync / Setting the Time Manually / Setting the Alarm Operating the Alarm / Playing and Charging your iPhone/iPod / FM Radio Mode...
Start Guide Updating your Firmware To update the firmware on this unit to the latest version, please download the free iHome+Sleep app from the app store. Launch the app and follow directions for updating the firmware for this unit if available.
Color Button Press to cycle color settings Alarm Button Set and toggle alarm function Wakeup Button Resets sounding alarm for next day Works with iHome+Sleep app for custom settings Raise Volume Button Raise volume Lower Volume Button Lower volume Snooze/Dimmer Button...
1: power RESET RESET TEST T Attach AC adaptor cable to adaptor jack on back of the iA17 and plug the other end into a wall socket to play and charge iPhone/iPod. 4: radio Press and release the Radio Button to turn on unit in radio mode.
Active App indicator Appears when an iHome app is active Low Backup Battery indicator Radio mode indicator Installing/Replacing the Clock Backup Battery Note: The CR2032 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.
The PM indicator will not appear when display is in 24 hour mode. 4. Press the Time Sync Button again (or no button press within 10 seconds) to exit the clock setting mode. The display and cabinet will flash green and 2 beeps will confirm clock setting is complete.
At the set time, the alarm will sound for 1 hour. If waking to iPhone or iPod, make sure your playlist has an hour of music in it. 1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the or Wakeup Button.
Aux Line-in Jack located on the back of the unit. 2. Press the Button on the iA17 to play your audio device. Place your device in play mode. 3. Press the Button to adjust the volume on the unit.
3. During sleep mode, press the Bedtime Button to view the sleep time remaining. Press again to set sleep to the next lowest setting. Tip: Use the iHome+Sleep app to enjoy expanded and custom bedtime settings Color Change Mode Dimmer Mode Bedtime Sleep Mode Buttons.
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
Sound is distorted Volume level is set too high Sound source is distorted iA17-043011-English Trouble Shooting Plug the AC adaptor into a wall outlet and plug the connector into the power supply jack on the unit...
Need help?
Do you have a question about the IA17 and is the answer not in the manual?
Questions and answers