Chapter 3 System And Network Setup; Build Network Connection; Connecting Brd70N; Network Setup - Sapido BRD70n User Manual

Chapter 3
The BRD70N is an easy to setup and wireless device for various application and environment,
especially for large installs such as hotels, offices space, warehouses, hot-spots and more.
To begin with BRD70N , you must have the following minimum system requirements. If your
system can't correspond to the following requirements, you might get some unknown troubles
on your system.

Internet Account for XDSL/Cable Modem

One Ethernet (10/100mbps) network interface card.

TCP/IP and at least one web browser software installed (E.g.: Internet Explorer, Firefox,
Safari、Chrome latest version).

802.11b、g、n wireless adapter for wireless mobile clients.

Recommended OS: WinXP, Visata or Win7 / Linux.
3.1

Build Network Connection

Administrator can manage the settings for WAN, LAN, Wireless Network, NTP, password,
Firewall, etc.
Please confirm the network environment or the purpose before setting this product.
3.2 Connecting
Prepare the followings before the connection:

PC or Notebook for setup

Ethernet cable
1. Make sure you are under "Router Mode".
2. Connect BRD70N to xDSL/ Cable modem with the Ethernet cable.
3. Turn on your Computer.
3.3

Network setup

After the network connection is built, the next step is setup the router with proper network
parameters, so it can work properly in your network environment. Before you connect to the
wireless router and start configuration procedures, your computer must be able to get an IP
address from the wireless router automatically (use dynamic IP address). If it's set to use
static IP address, or you're unsure, please follow the below instructions to configure your
computer with dynamic IP address:
Insert BRD70n into PC USB port and install utility/driver，after the utility and driver done，
you can get an IP address from BRD70n（router mode）
3.3.1

Windows 2000

Click "Start" button (it should be located at lower-left corner of your computer), then click
control panel. Double-click Network and Dial-up Connections icon, double click Local Area
Connection, and Local Area Connection Properties window will appear. Select "Internet
Protocol (TCP/IP)", then click "Properties".
http://www.sapido.com.tw/
System and Network Setup
BRD70N
9
User Manual v1. 0.0