Table of Contents
Advertisement
DVD Operations
Play Discs
1. Press the OPEN/CLOSE Button (∆) on the front panel and load the Disc on the tray.
The label side should be facing upwards. For a Double-sided DVD Disc, put the disc
with label A/1 up.
2. Press the OPEN/CLOSE (∆) button again to close the tray and the disc will be
loaded.
3. The Disc will be played automatically.
•
If it is a DVD disc, it will show the Menu/Title Page on the screen.
•
If it is a CD, it will play the first track directly.
4. Press the STOP Button ( ) if you want to stop the Disc playback You can resume
playback by pressing the PLAY button and it will start at the location where you have
pressed stopped (Resume Play).
5. Press the STOP Button twice to have the Disc really stopped.
PAUSE Mode
This function is applicable for DVD and CD audio.
•
For DVD , the picture will become static.
•
For CD audio, it will become silent.
1. Press the PAUSE Button ( || ) will cause the player to enter Pause mode.
2. Press the PLAY Button or PAUSE Button again will resume to Play State.
OSD
There are 6 OSD languages embedded in the DVD Player : English,Spanish,German
French,Danish AND Swedish.
1. Press the SETUP button on the remote controller to enter the setup menu main page.
2. Choose General Setup through the Navigation Arrows (
3. Go to the OSD LANG option and use the Navigation Arrows to do the selection.
4. Press ENTER to confirm.
5. Press SETUP again to quit the Setup menu.
DVD Menu Play
The DVD Menu Play function is only applicable for DVD movie.User can access the Casting
information, Production History,Movie Introduction etc. directly through this function.
1. Press the DVD MENU Button on the remote controller to enter the Root Menu.
2. Use the Navigation Arrows (
to do the selection.
3. Press ENTER to confirm the selection.
P2120-DENVER IB(ENGLISH).p65
) or input the item index through the Number keys (0-9)
19
19
) and press
2003/4/25, ¤U¤È 02:45
Advertisement
Table of Contents
