Page 1
Color Television +DVD player TVD-2148 MPEG4 Operating Instructions ON SCREEN DISPLAY REMOTE CONTROL FS TUNER SCART CONNECT SIDE AV IN INSIDE DVD SUPPORT MPEG4...
Table of Contents Menu Navigation 13-16 Table of Contents Warning Initial Settings(DVD) 17-18 Congratulations Features Installation Power Source Combination VHF/UHF Optional Equipment Connections Remote Control Operation 9-12...
Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 2. Do NOT expose the television 3. Do NOT expose the television The lighting flash with arrow head within a The exclamation point within a triangle is to direct sunlight.
Warning 13.DAMAGE REQUIRING SERVICE - Unplug this unit from the wall 7.POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed outlet and refer servicing to qualified service personnel under the upon or against them, paying particular attention to cords at plugs, following conditions: convenience receptacles, and the point where they exit from the...
Congratulations Your new TV Monitor/Receiver features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at Design and specifications are subject to change without prior notice. the factory for best performance. Specifications Receiving System: BG DK I M...
Features TV Mode: Infrared remote control - Electronically locks in and memorizes Selecting a angle - You can select desired audio language and available channels for perfect reception. sound mode, if different languages and modes are available on a disc. Search - Chapter search / Title search / Track search / Time search.
Installation Power Source Remote Control Battery Installation Requires two AAA batteries(supplied). TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 110V-240V 50/60HZ polarized AC outlet. NOTE: 1.This TV can be connected to the specified voltage (AC 110-240V, 50/60HZ).
Combination VHF/UHF Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm For Subscribers to Scrambled Cable TV service twin-lead wire) If you subscribe to a cable service which requires the use of a Connect the 75 ohm cable from a combination VHF/UHF antenna to converter/descrambler box, connect the incoming cable to the the antenna jack.
Optional Equipment Connections Connection Panels Front Control Panel The actual configuration on you TV maybe different, depending on your model. Side AV VIDEO VIDEO VIDEO IN LEFT LEFT AUDIO L/R IN RIGHT RIGHT HEADPHONES OUT Headphone Rear of TV plug SCART COAXIAL OUT 1.
Remote Control Operation TV MODE: OPEN/CLOSE POWER POWER SLEEP Button Press this button to switch television on or off. P. P P. P To set TV turn off after a preset amount of time, press the SLEEP button on the remote control. The shut off time can be MUTE Button determined each time the button is pressed in order of 0, To turn off the sound, press this button once.
Page 12
Remote Control Operation TV Mode: OPEN/CLOSE POWER VOL- VOL+ STOP Button VOL +/- Button P. P P. P Press this button to stop teletext. Press the VOL + button to increase, or the VOL button to decrease the volume level. CLOCK Button SYS.
Page 13
Remote Control Operation DVD Mode: OPEN/CLOSE POWER DVD SETUP Button POWER You can enjoy picture frame forward by pressing this button. Press this button to switch television on or off. P. P P. P AUDIO Button OPEN/CLOSE Button To press this button, you can change the audio language Press OPEN/CLOSE button to load disc on disc tray.
Page 14
Remote Control Operation DVD Mode: OPEN/CLOSE POWER REPEAT Button ZOOM button To press this button you can repeatedly play a title(DVD) or all 1.Press ZOOM during playback or still playback to activate ¡±appears on TV screen, you can tracks(CD) when¡°ALL the Zoom function.
Menu Navigation TV PARTS: Menu Navigation PICTURE Press¡°MENU¡±button to display the function, press this button again to change the function display as follow sequence: BRIGHTNESS Adjusts dark or white areas of picture ¡°PRESET -> PICTURE -> SYSEM -> TIME¡±press this button CONTRAST Adjusts desired contrast intensity again to exit the function display mode...
Page 16
Menu Navigation PRESET TIME CHANNEL CLOCK 00:00:00 SKIP TIMING 61.25MHz TVON ASM.SIF 6.0M TVOFF FINE AWOKE SEARCH AWTIMR Times must be entered in CLOCK to operate the TIME feature Turn on this function to use TIME feature To turn the television on at selected time. 4.PROG +/- Buttons To turn the television off at selected time.
Menu Navigation DVD Mode: OPEN/CLOSE BUTTON AUDIO BUTTON Press OPEN/CLOSE button to load disc on disc tray. To press this button, you can change the audio language from the one Hold the disc without touching either of its surfaces, position it with the selected at the initial settings to a different language, if available.
Page 18
Menu Navigation REPEAT BUTTON STOP BUTTON( To press this button you can repeatedly play a title(DVD) or all tracks(CD) When this button is pressed once, the unit records the stopped when " ALL " appears on TV screen, You can repeatedly play point, from where playback will resume (resume function) a chapter(DVD) or a single track(CD) when "...
Inital Settings(DVD) AUDIO SETUP PAGE COMMON PROCEDURES OF INITIAL SETTINGS Dolby General Audio Video Preference Speaker Setup Page Press SETUP button to get the setup menu. Use direction buttons " " Downmix LI/RI to select the preferred item . After finishing settings, press SETUP again to TV Stereo display.
Page 20
Inital Settings(DVD) VIDEO DIGITALSETUP PAGE Dolby General Audio Video Preference PASSWORD CHANGE PAGE Video Setup Page Sharpness High Brightness Medium Contrast PASSWORD CHANGE PAGE OLD PASSWORD [ XXXX ] NEW PASSWORD [ YYYY ] Go To Video Setup Page CONFIRM PASSWORD [ YYYY ] The following menu items can be changed: Sharpness: sharpness value.
Need help?
Do you have a question about the TVD-2148 and is the answer not in the manual?
Questions and answers