Verint Nextiva S2750e Series User Manual page 48

A: Factory Default Configuration
The S2750e is programmed at the factory with the following configuration:
Type
Access management
Network
Video settings (North
America)
Video settings (Europe)
VSIP
38
Configuration
User accounts: Disabled
Telnet sessions: Enabled
IP firmware update: Enabled
Global security profile: Disabled
SSL passkey: <empty>
DHCP configuration: Disabled
IP address: 169.254.*.* (last two bytes of the MAC address
of the device)
Subnet mask: 255.255.0.0
Gateway: 0.0.0.0
Target frame rate: 30 fps
Target bit rate: 4000 kbps
Resolution: 4CIF (704 x 480)
Maximum quantizer: 24
Video standard: NTSC
Target frame rate: 25 fps
Target bit rate: 4000 kbps
Resolution: 4CIF (704 x 576)
Maximum quantizer: 24
Video standard: PAL
Video rotation: Automatic
VSIP port: 5510
VSIP multicast IP address: 224.16.32.1
VSIP discovery IP address: 255.255.255.255
Verint Video Intelligence Solutions