Connecting Peripheral Devices - MSI Wind Box DC110 User Manual

Wind Box Series

Connecting Peripheral Devices

The I/O (input/output) ports on the rear panel allow you to connect peripheral devices.
All devices listed here are for reference only.
 Connecting VGA-Out & HDMI-Out Devices
This Wind Box DC110 provides a VGA port and an HDMI port for connection to ex-
ternal monitors, projectors, set-top boxes, DVD players, digital video cameras, mini
notebooks, digital cameras, etc.
VGA (Video Graphics Array) is a graphics display system for PCs. VGA connectors and
their associated cabling are always used solely to carry analog video signals along with
digital clock and data.
HDMI (High Definition Multimedia Interface) is a new interface standard for PCs, dis-
plays and consumer electronics devices that supports standard, enhanced and high-
definition video, plus multi-channel digital audio on a single cable.
2-3
To connect the VGA/ HDMI device, first make sure the Wind Box DC110 and the tar-
geted device are both powered off, and then connect the cable of the device to the VGA/
HDMI port of your Wind Box DC110.