Setting The Clock - Onkyo FR-X7A Instruction Manual

Setting the Clock

You can select either the 12-hour or 24-hour display. (This section explains how to set the time
based on the 24-hour display.)
DISPLAY
DISPLAY
1
Press TIMER repeatedly until
"Clock" appears in the display.
2
Press MULTI JOG.
You can now set the day of the week.
3
Turn MULTI JOG to select the cur-
rent day of the week.
4
Press MULTI JOG to confirm the
setting.
You can now set the time.
5
Turn MULTI JOG to set the cur-
rent time.
You can also use the number buttons
on the remote controller.
To switch between the am and pm indi-
cators, press the --/--- button on the
remote controller.
button
1
EDIT/
NO/CLEAR
2-6
6
Press MULTI JOG to start the clock.
You can also use the ENTER button on
the remote controller.
It can be helpful to synchronize with an
accurate time source.
The clock starts operating and a dot
indicating seconds starts to flash.
To cancel the clock setting
Press EDIT/NO/CLEAR.
Checking the time and the day of the
week
To check the time and the day of the week, press
CLOCK on the remote controller.
The clock appears for eight seconds in Standby mode.
To switch between the 12-hour and 24-
hour displays
Press DISPLAY while the current time is indicated on
the display.
To display the current time while the unit
is in Standby mode
First turn on the power to the unit, then press and hold
down the STANDBY/ON button for more than two sec-
onds.
To cancel the current time indication, press and hold
down the STANDBY/ON button for more than two sec-
onds while the power is on.
CLOCK
19