Normal Operation - Carrier TSTATCCPB501 User's Information Manual

Press the Mode button.
While holding the Mode,
MODE
press the Fan button
for 2 seconds to enter Setup
FAN
screens.
I2:00
SuMoTuWeThFrSa
Press both Mode and
Fan buttons as
above to return to

normal operation.

The thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment* without
the need for further programming. To optimize the
installation of this thermostat follow the instructions
in the Advanced Setup section.
* The thermostat is not preprogrammed from the
factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the
Advanced Setup section, pages 12 & 13.
I
2
MODE
FAN
During Setup & Programming:
Pressing the Mode button
selects different flashing items.
(Represented in dark black)
Pressing the Up and Down
buttons will modify the flashing
selection.
To adjust the
Press
clock or Day use
MODE
buttons.