Safety Instructions; Recognize Safety Symbols, Words And Labels; Safety Guidelines - Amana REMOTE HEAT PUMP Installation Instructions Manual

The following symbols and labels are used throughout this manual to indicate immediate or potential safety hazards. It
is the owner's and installer's responsibility to read and comply with all safety information and instructions accompanying
these symbols. Failure to heed safety information increases the risk of personal injury, property damage, and/or product
damage.
WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which COULD result in minor or moderate personal injury, product damage,
property damage.
To avoid personal injury, shock, or death, ensure the electrical
disconnect switch(es) is (are) in the OFF position before installing,
modifying, or servicing the unit. Lock out and tag the switch with
a suitable warning label. Wiring must conform with NEC or CEC
and all local codes.
1. Allow only qualified, experienced technicians to install or service this
2. Install the system in accordance with all local codes. If no local
3. Open the electrical disconnect switch(es) before electrically connect-
4. Before operating the unit, be certain it is properly grounded.
5. The unit contains refrigerant gas under pressure. Avoid puncturing
6. Before operating the unit, complete the refrigerant connections.

Safety Instructions

Recognize Safety Symbols, Words, and Labels
unit.
codes exist, follow National Codes (NEC in the U.S., CEC in
Canada).
ing the unit.
or breaking any tubing.
WARNING
CAUTION
WARNING

Safety Guidelines

2