Icom iF22SR Instruction Manual page 23

[Example]
To assign code '261I (Inverse)' as CH12;
q While pushing and holding [PTT], [S-Ring/C-Ring], [MONI], turn
[VOL] to turn the power ON.
w Select CH 12.
e Push and hold [MONI] until a beep (Pi) is emitted.
r Push [PTT] twice to choose the 100 digit of the code number.
t Push [S-Ring/C-Ring].
•
Confirmation beep is emitted. (See p. 15)
y Push [PTT] six times to choose the 10 digit of the code number.
u Push [S-Ring/C-Ring].
•
Confirmation beep is emitted. (See p. 15)
i Push [PTT] once to choose the 1 digit of the code number.
o Push [S-Ring/C-Ring].
•
Confirmation beep is emitted. (See p. 15)
!0 Push [PTT] once more, to use Inverse mode.
*You can skip step !0 , if you want to use Normal mode.
!1 Push [S-Ring/C-Ring] to complete the setting.
•
Confirmation beep is emitted. (See p. 15)
!2 Turn the power OFF, and then ON again.
• DTCS code list (EIA/TIA standard code)
023 071
072
025
026 073
074
031
032 114
115
043
047 116
125
051
054 131
132
065
134 223 306
143 226 311
152 243 315
155 244 331
156 245 343
162 251 346
165 261 351
172 263 364
174 265 365
205 271 371
BASIC OPERATION
411 503 631
412 506 632
413 516 654
423 532 662
431 546 664
432 565 703
445 606 712
464 612 723
465 624 731
466 627 732
3
734
743
754
18