Basic Operations
165
I
Formatting Memory Cards
You should always format a new memory card or one from which you
wish to erase all images and other data.
• • • Please note thatformalting (initializing) a memory ca!"derases
" a l l data, includingj:i~otected images and other file tyPes.
. . . .
• When the ~ icorlis displayed, sound data recordedwith
J'
'.
the sound recorde( exists. Exercise adequate cautjc)nbefore
fprinatting therm§rnory card.
.
. . .
-·r
'S;i~-;;t[F;~~;ti:-'--"~~-"-""
' " - -_
_._.~
_.-.-
1. Press the ~ button.
2. Use the
+
or .. button to select
[W)Menu.
3. Use the ... or
+
button to select
[Format).
•
4. Press the
@
button.
"2
Accept the setting.
1. Use the
+
or .. button to select
[OK)
2. Press the
@
button.
• To perform a low level format, use
the ... button to select [Low Level
Format) and the
+
or .. button to
add a check mark.
• You can stop formatting a card
when [Low Level Format) is
selected by pressing the FUNC./SET button. You can still use
a card without problem when formatting is halted, but its data
will be erased.
Low Level Format
We recommend you select [Low Level Format) when you think
that the recording/reading speed of a memory card has
dropped. A low level format may require 2 to 3 minutes with
some memory cards.