Canon PowerShot SD870 IS Digital Elph User Manual page 47

Components Guide
I
45
I
Indicator
The indicator on the back of the camera lights or blinks under the
following conditions.
Green: Ready to shoot (camera beeps twice)*/connected to
computer/display off
Blinking Green: Camera starting uplTime Lapse (movie) recording/
Image recording/readinglerasing/transferring (when
connected to a computer/printer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
• Camera beeps once if difficult to focus.
•
·.f'NeY~r'dojll~jO!IcJ,\,!i.~·g·\Y~i1e~:the{!?~l~f?:r~;§li~1(~{g~~~~.::;:JHjj~'"
~
actions maycorrupt'lmage'data
cO'",_
yo.>" __ ·
o' .." , . , , , , , , . ,....•.
' : • . •
· .};;,-:E.F~3~k~~{J~',~:~~~t~~t~~&·ih~~~~~~;
. . . . .
~:~;J~
. .
' ~::.
~~~~r
;,:,:5\5 }\.
.{;\.~i;;:</i
' : i·e!,:
·>is!,, ' .
I
Power Saving Function
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the power button again to
restore power.
Shooting Mode Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after
the last control is accessed even if [Auto Power
Down) is set to [Off). Press any button other than
the power button or change the camera
orientation to turn the LCD monitor back on.
Playback Mode Powers down approximately 5 minutes after the
Connected to a Printer last control is accessed on the camera.
• This time can be changed.
fl] •
The power saving function will not activate during a slide
- show or while the camera is connected to a computer.
• TRe power saving function settings can be changed (p. 51).