Canon PowerShot SD870 IS Digital Elph User Manual page 368

30
Cancel Printing
• To cancel printing between images printed, press the FUNC.I
SET button. A confirmation dialog appears. Select [OK] and
press the FUNC.lSET button. The printer will stop printing the
current image and eject the paper.
Restarting Printing
• Select [Resume] and press the FUNC.lSET button. The
remaining images can be printed.
• Printing cannot be restarted under the following circumstances.
• If
the print settings have been changed before restarting .
• If the image for which the print settings were set has been
deleted before restarting.
• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.
• If
printing is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack or new batteries,
then turn the camera power on again. If you intend to use an
extended period of time, you are recommended to power the
camera with a compact power adapter (sold separately).)
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the FUNC.lSET button. If [Continue]
cannot be selected, select [Stop], press the FUNC.lSET button
and restart the print job. See List of Messages (p. 31) for
details.