Disassembly.and.assembly; Preparation And Precautions; Disassembly Procedures - Robin America RGX7100 Service Manual

7. DISASSEMBLY.AND.ASSEMBLY

7-1.PREPARATION.and.PRECAUTIONS
(1) Be sure to memorize the location of individual parts when disassembling the generator so that
the generator can be reassembled correctly . Tag the disassembled part with the necessary
information to facilitate easier and smoother reassembly .
(2) For more convenience, divide the parts into several groups and store them in boxes .
(3) To prevent bolts and nuts from being misplaced or installed incorrectly, replace them
temporarily to their original position .
(4) Handle disassembled parts with care; clean them before reassembly using a neutral cleaning fluid .
(5) Remove the battery before disassembling the generator . (Electric start models)
(6) Use all disassembly/assembly tools properly, and use the proper tool for each specific job .
(7) Be sure to attach the foam rubber linings inside the covers on their original position when
reassembling the generator . When deformation or damage or falling-off of foam rubber lining
is found, replace it with new part . Failure to do so will result in poor performance and durability
of the generator .
(8) Bind the wires and fuel pipes using wire bands as they have been done in original configuration .
NOTE : A s to detailed information for servicing procedures on engine portion, please refer to
Robin engine service manual for "EX35/40".
7-2.DISASSEMBLY.PROCEDURES
7-2-1.FUEL.TANK
(1) Shut the fuel strainer and discharge fuel
from caburetor .
(2) Disconnect rubber pipe from the strainer .
(3) Remove the fuel tank .
M6 flange bolt . . . 4 pcs .
Rubber(tank) . . . 4 pcs .
FUEL TANK
- 27 -
FLANGE
BOLT
RUBBER
(TANK)