Traxxas 4810 Owner's Manual page 10

Installing Nitro 4-Tec Body Mounts
Installing Body Mounts
The body mount parts are located in a separate bag with your
instructions. The front body mount posts attach to the front
bumper with 3x10mm counter-sunk self-tapping screws. Now
slide the foam bumper over the front mounts, as shown in the
drawing. The excess length of the mounts should be trimmed
off after the body is installed. The rear body mounts attach as
shown in the drawing.
Installing Front
Body Mounts
10
Foam
Bumper
3x10mm Countersunk
Self-tapping screws
Installing Rear
Body Mounts
3x14mm Washerhead
Self-tapping screws