Table of Contents
Advertisement
8 Listen to the
radio
Tune to a radio station
Tip
•
For optimal FM reception, fully extend and adjust the
position of the FM antenna.
1
Press FM to select the FM tuner source.
2
Press and hold
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
repeatedly until you find optimal
reception.
Select stereo/mono broadcast
For stations with weak signals: to improve the
reception, change to monaural sound.
In FM tuner source, press MODE/MONO/
•
STEREO to select a setting:
•
[STEREO]: stereo broadcast.
[MONO]: monaural broadcast.
•
Program radio stations
Tip
•
You can program a maximum of 20 preset radio
stations.
18
EN
/
for more than two
Program radio stations automatically
In FM tuner mode, press and hold PROG/
•
CLOCK SET for more than two seconds
to activate automatic programming.
» [AUTO SRCH](auto search) is
displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
Program radio stations manually
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
» [PROG] (program) blinks on the
display.
3
Press
/
to this radio station, and then press PROG/
CLOCK SET to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
•
In FM tuner mode, press
preset number.
•
You can also press the numeric key to
select a preset number directly.
/
to allocate a number (1 to 20)
/
to select a
Advertisement
Table of Contents
