Other Features; Set The Sleep Timer; Set The Alarm Timer; Play From An External Device - Philips DTM9030 User Manual

10 Other features

Set the sleep timer

This unit switches to standby mode
automatically after a set period of time.
When the unit is turned on, press TIMER/
•
SLEEP repeatedly to select a set period of
time (in minutes).
When the sleep timer is activated, SLEEP
(sleep) is displayed.
To deactivate sleep timer
Press TIMER/SLEEP repeatedly SLEEP
•
(sleep) disappears.

Set the alarm timer

This docking system can be used as an alarm
clock. You can select CD, FM TUNER, iPod/
iPhone, or USB as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER/
SLEEP until [SET TIMER](set timer) scrolls
on the display.
2
Press DISC, USB, DOCK/MENU, or FM to
select a source.
3
Press TIMER/SLEEP to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / to set the hour, and then press
TIMER/SLEEP again.
» The minute digits are displayed and
begin to blink.
5
Press / to set the minute.
6
Press TIMER/SLEEP to confirm.
» The alarm timer is set and activated.
Note
•
To exit the alarm timer setting without storing, press
Activate and deactivate the alarm
timer
• In standby mode, press TIMER/SLEEP
repeatedly to activate or deactivate the
alarm timer.
» If the alarm timer is activated, TIMER
(timer) is displayed
» If the alarm timer is deactivated,
TIMER (timer) disappears.
Note
•
If the CD/USB/DOCK source is selected, but no disc
is placed or no USB/iPod/iPhone is connected, the FM
TUNER is selected automatically.

Play from an external device

You can also listen to an external audio device
through the unit.
Connect through the AUDIO INsocket:
1
Connect a 3.5mm audio cable (not
supplied) to:
the AUDIO IN socket on the back of
•
the main speaker.
• the headphone socket on an external
audio player.
2
Press AUDIO IN/AUX repeatedly to
select the 3.5mm audio input (AUDIO_IN)
source.
.
EN 21