Preparing The Card Remote Commander; Setting The Clock - Sony CDX-GT820IP Operating Instructions Manual

Preparing the card remote
commander
Before using the card remote commander for the
first time, remove the insulation film.
Tip
For how to replace the battery, see "Replacing the
lithium battery of the card remote commander" on
page 21.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until "Clock
Adjust" appears.
3
Press the select button.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press
(SEEK)
-/+.
5
After setting the minute, press the
select button.
The setup is complete and the clock starts.
•
5