Menu Operation; Basic Tv Operation - Marks & Spencer MS2751DVB User Manual

Menu Operation

Basic TV operation

TURN ON LCD TV
1.Connect power cable to mains supply and turn on the power by using the " Switch" at the back of
the TV on the right hand side. The standby indicator on the front of the TV will light up in red.
2. Press the POWER button on the top of the TV or the
turn on the TV, the indicator will light green.
TURN OFF LCD TV
Press the POWER button on the top of the TV or the
the TV off into standby mode, the indicator will light red.
NOTE: When you initially use the TV, you will see the "First Time Installation" menu as below:
Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
TV
pressing . You will see the first time
installation menu.
Press the button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.
By pressing the Quick Start button the first
time installation can be recalled at any time.
1. Press VOL+/- to adjust the volume.
2. If you want to switch the sound OFF, press the MUTE
3. You can cancel this function by pressing MUTE or VOL+ button.
Using the CH+/- on the front panel or on the remote control.
Press CH+ to increase channel number.
Press CH- to decrease channel number.
First time installation
9
button on the remote control to
button on the remote control to turn