Icom IC-7200 Installation Manual page 12

COM PORT CONFIRMATION
After the driver installation is completed, confirming the driver availability and the port number is recommended.
Windows Vista
q Start up Windows.
w Right click "Computer," then select "Properties."
• "Computer" is available in <Start> menu.
e "System" screen appears as below.
Click [Device Manager].
Click
r I n case "User Account Control" dialogue box ap-
pears as below, click [Continue].
t "Device Manager" screen appears.
Click " " of "Ports (COM&LPT)."
y Confirm "CP210x USB to UART Bridge Controller
(COMM)" is displayed.
• If "!" or "×" indicator is displayed on the "Device Man-
ager" screen, the driver may not be installed properly.
Un-install the USB driver then reinstall in such cases.
"M" is the COM port number, that is used for the
communication setting with the utility software.
q Click "
Check the COM port number.
w
(In this example, the USB serial
COM port number is "8.")
Click
"
Windows XP
For Windows 2000:
Refer to the following instructions because the
operations of Windows 2000 are similar to Windows
XP.
q Start up Windows.
w Right click "My Computer," then select "Properties."
• "My Computer" is available in <Start> menu.
e "System Properties" screen appears as below.
Click [Hardware] tab and then click [Device Man-
ager].
r "Device Manager" screen appears.
Click " " of "Ports (COM&LPT)."
t Confirm "CP210x USB to UART Bridge Controller
(COMM)" is displayed.
• If "!" or "×" indicator is displayed on the "Device Man-
ager" screen, the driver may not be installed properly.
Un-install the USB driver then reinstall in such cases.
"M" is the COM port number, that is used for the
communication setting with the utility software.
q Click "
Check the COM port number.
w
(In this example, the USB serial
COM port number is "8.")
12
Click
Click
"