Advanced Chipset Features Setup - Chyang Fun CFI-S86 User Manual

High performance socket478b motherboard
Table of Contents

Advertisement

Chapter 4
Virus warning: Allows you to choose the VIRUS warning feature for IDE hard disk boot
sector protection. If it is enabled and someone attempt to write data into the sector, BIOS will
show a warning message on screen and alarm beep. Enabled, Disabled
CPU L1 & L2 Cache Enabled, Disabled
CPU L2 Cache ECC Checking Enabled, Disabled
Quick Power On Self Test: Allows the system to skip some tests while booting. Disabled is
Normal POST. Enabled, Disabled:
First (Second, Third) Boot Device: Select Your Boot Device Priority.
Floppy, LS120, HDD-0, SCSI, CD-ROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled.
Boot Other Device: Enable boot from other device.
Swap Floppy Drive If the system have two floppy drives, choose Enabled to assign physical
drive B to logical drive A and vice-versa. Disabled, Enabled
Boot Up Floppy Seek: Tests the tracks of floppy drives to determine whether they have 40 or
80 tracks. Enabled, Disabled
Boot Up NumLock Status: Selects power on state for NumLock. On, Off
Typematic Rate Setting: Keystrokes repeat at a rate determined by the keyboard controller,
When enabled, you can configure the following two items. Enabled, Disabled
Typematic Rate (chars/sec):The rate at which character repeats when you hold down a key.
Typematic Delay (Msec): The delay before keystrokes begin to repeat.
Security Option: Determine whether the password is required every time the system boots or
only when you enter setup. Setup, System
OS Select For DRAM>64MB: Selects OS2 only if you are running OS/2 operating system
with more than 64MB RAM. Non-OS2, OS2
Video BIOS Shadow Enabled copies Video BIOS to shadow RAM to improves performance.
Enabled, Disabled
Small Logo(EPA) show: Disabled, Enabled
4.4

ADVANCED CHIPSET FEATURES SETUP

Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
12

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CFI-S86 and is the answer not in the manual?

Table of Contents