Mercer Crib (M6801)- Toddler Bed Conversion Assembly - Babyletto Mercer Crib Assembly And Operation Manual

STEP 1.
All of the parts and hardware you will need is
supplied with the crib at the time of purchase.
STEP 2.
Unscrew the 4 Allen head bolts (W) and re-
move the front panel assembly (B).
F
STEP 4.
Attach the guard rail (F) to the side panel posts using four Allen head bolts (XX).
The guard rail can be installed with the high end facing either to the left or the right.
Check to make sure that all of the bolts are fastened securely. Do not overtighten.
The mattress intended for use on the bed is to have minimum dimensions of : 51 5/8 x 27 1/4 x 4 inches thick.
WARNING:
The minimum age to use toddler bed conversion rail shall not be less than 15 months and the maximum
weight shall not be greater than 50 lbs.
Failure to follow these warnings and the assembly instructions could result in serious injury or death from
entrapment or strangulation. Do not place the bed near windows where cords from blinds or drapes may
strangle a child.
If guard rails are used as the mattress containment means, the guard rails provided must be used.

Mercer Crib (M6801)- Toddler bed conversion assembly

STEP 3.
Move the spring frame to the lowest level.
XX
page 9