Honda 2003 Accord Sedan Owner's Manual page 320

Main Menu Table of Contents
Replacing Rear Bulbs
(in Fenders)
COVER
1. Open the trunk.
Remove the light assembly cover
by pulling its outside edge.
2. Determine which of the two bulbs
is burned out: stop/taillight or turn
signal.
BULBS
3. Remove the socket by turning it
one-quarter turn counterclockwise.
SOCKETS
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
6. Test the lights to make sure the
new bulb is working.
7. Install the light assembly cover.
Make sure it snaps into place.
Maintenance
Lights
317