Honda 2003 Accord Sedan Owner's Manual page 210

Main Menu Table of Contents
SUPPORT ROD
4-cylinder models
3. Pull the support rod out of its clip
and insert the end into the hole on
the front of the hood near the
center.
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
Service Station Procedures
6-cylinder models
3. Lift the hood up most of the way.
The hydraulic supports will lift it
up the rest of the way and hold it
up.
To close the hood, lower it to about a
foot (30 cm) above the fender, then
press down firmly with your hands.
After closing the hood, make sure it
is securely latched.
Before Driving
CONTINUED
207