Honda 2003 Accord Sedan Owner's Manual page 280

Main Menu Table of Contents
RESERVE MOUNTING
TANK CAP BOLT
6-cylinder models
5. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder. Install the
mounting bolt.
6. When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
RESERVE FILLER NECK
TANK
HOLDERS 4-cylinder models
7. Pour Honda All Season
Antifreeze/Coolant Type 2 into
the radiator up to the base of the
filler neck. This coolant is a
mixture of 50 percent antifreeze
and 50 percent water. Pre-mixing
is not required.
FILLER NECK
6-cylinder models
Fill up to here
Cooling System
Fill up to here
CONTINUED
277
Maintenance