Operating The Radio - Honda 2003 Accord Sedan Owner's Manual

Table of Contents
Main Menu
Audio System

Operating the Radio

The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pressing the PWR/
VOL knob, the AM/FM button, or
the AUDIO DISPLAY button. Adjust
the volume by turning the knob.
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
seen in the upper display if the
station is broadcasting in stereo.
Stereo reproduction on AM is not
available.
You can use any of five methods to
find radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the preset icons.
170
Comfort and Convenience Features
Use the TUNE knob to
TUNE
tune the radio to a desired frequency.
Turn the knob to the right to tune to
a higher frequency, or to the left to
tune to a lower frequency.
The SEEK function
SEEK
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar ( or
release it. Depending on which side
of the SEEK bar you press, the
system scans upward or downward
from the current frequency. It stops
when it finds a station with a strong
signal.
), then