Honda 2003 Accord Sedan Owner's Manual page 163

Table of Contents
Main Menu
Audio System
Operation
Select the CD changer by pressing
the CD button. You will see ''CD'' in
the display. The system will begin
playing the last selected disc in the
CD changer. You will see the disc
and track numbers displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc 1.
To select a different disc, press the
appropriate side of a preset bar (1
6). If you select an empty position in
the CD changer, the system will go
into the loading sequence (see page
158 ).
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
160
Comfort and Convenience Features
To move rapidly within a track, press
and hold the left or right side of the
SKIP bar. You will hear a beep and
the system will continue to move.
Press to move forward, or
to move backward. Release the
bar when the system reaches the
point you want.
Each time you press
release it, the system skips forward
to the beginning of the next track.
Press and release to skip
backward to the beginning of the
current track. Press and release it
again to skip to the beginning of the
previous track.
REPEAT
feature, press and release the RPT
button. You will see RPT in the
display as a reminder. The system
continuously replays the current
track. Press the RPT button again to
turn it off. Pressing either side of the
SKIP bar also turns off the repeat
feature.
and
RANDOM PLAY
when activated, plays the tracks
within a CD in random order, rather
than in the order they are recorded
on the CD. To activate Random Play,
press the RDM button. You will see
RDM in the display. The system will
then select and play tracks randomly.
This continues until you deactivate
Random Play by pressing the RDM
button again, or you select a
different CD with a preset bar.
To activate the Repeat
This feature,