Skier's Choice Supra 2014 Owner's Manual page 36

Ballast and Trim
The Ballast screen can be accessed by pressing the Ballast Quick
Access Key. This screen displays the current state of the ballasts
and is interactive for immediate settings.
To adjust the Ballast settings slide finger up the tank to the
desired level or tap the UP or DOWN arrows to right of the tank.
As an example, the illustration shows the Starboard and Port
tanks filling to achieve 50% while the center tank is draining to
achieve 0% tank capacity.
The following functions can also be accomplished from this
screen:
• FILL ALL – touch to fill all the ballasts
• DRAIN ALL – touch to drain all the ballasts
• STOP ALL – touch to stop all filling or draining activity
• SAVE – touch to save the current settings to the current
profile
X – touch to exit the current screen
•
Profiles
The Profiles screen can be accessed by pressing the Profiles
Quick Access Key. This feature displays rider/user profiles for
cruise controls based on user preferences for speed, ballast,
and smart plate settings. Up to 16 rider/user profiles can be
created and stored.
To activate the profile, touch the profile name for the profile
to be activated. To edit any field, press and hold the field to
display the popup. For on screen information about profiles,
touch and hold in the lower left corner of the screen. A
popup is displayed giving details/actions from the screen you
are viewing.
— 3 — 3
New Rider Profile and Status
To create a new profile, press the Profile Quick Access Key. Touch
each option to view or change the setting. When available, touch
the arrows to change the setting. After entering the information,
touch [Done] to move to the next step, or touch [Cancel] to close
without changes.
Touch [Add New Rider] to create a new profile.
Type a name for the new profile using the touch keypad and
touch [Done] to save the setting.
To change the Set Speed from the default, touch and hold the
[Set Speed] cell.
© 2014 Skier's Choice, Inc. © 2014 Skier's Choice, Inc.