Throttle Lever - Skier's Choice Supra 2014 Owner's Manual

Luxury inboard boats
Hide thumbs Also See for Supra 2014:
Table of Contents

Advertisement

Throttle Lever

The throttle lever controls both the throttle and the transmission.
The idle position (normally vertical) is the zero throttle position
and the neutral position for the transmission. A safety ring
(umbrella) keeps the lever from being accidentally moved to
engage the transmission.
To place the transmission into gear, with your hand placed over
the lever ball, pull up on the safety ring (umbrella) and slowly
push the lever into forward gear or slowly pull the lever back
into reverse gear.
Never shift the lever directly from the neutral (vertical) position
into a speed position.
To prevent damage to the transmission, always allow
the transmission time to engage before accelerating the
engine.
Once the transmission's engaged, you may accelerate as
quickly as you like.
The Transmission Lockout button allows the transmission to be
disengaged while giving the throttle full operating range. With
the lever in the idle position (normally vertical), push the button
located at the bottom of the lever to disengage the transmission.
The throttle may then be operated in any open position (forward
of neutral or back of neutral upright position). Return the throttle
to idle position, and the transmission lockout will automatically
reengage the transmission in neutral position.
— 
© 2014 Skier's Choice, Inc.
Transmission
Lockout
Center Drain Plug
Cover Latch
On V-drive models the center drain plug is accessed via the
access cover in the center floor panel.
It is extremely important that the drain plug is always checked
before starting the engine. The drain plug should be secured
in place using a wrench.
DO NOT start engine until center drain plug is checked and
secured in place.
Rear Drain Plug
The rear drain plug is located at the back of the boat, near the
bottom of the transom (See photo). It is extremely important
that the drain plug is always checked before starting the engine.
The drain plug should be secured in place using a wrench.
DO NOT start the engine until the drain plug is checked and
secured in place.
DO NOT try to install the drain plug while the engine is
running.
Drain Plug
 —
© 2014 Skier's Choice, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Supra 20132014 supra 242

Table of Contents