Ac Input Leds; Battery Charge Leds - Powerware 5119 RM User Manual

The AC Input LEDs show information about the utility power coming
into the UPS (see Figure 15).
The second LED indicates that the UPS is operating normally from
utility power. The UPS is providing consistent voltage with the Buck
and Single Boost feature.
The third LED indicates that the UPS is using the Double Boost feature
to automatically correct voltage fluctuations.
If any AC Input LEDs are red, see page 34 for more information.
The Battery Charge LEDs show information about the UPS batteries (see
Figure 16).
Each LED represents the approximate percentage of battery charge.
When the battery is fully charged (greater than 90%), the top three
LEDs illuminate. If the battery capacity is between 66% and 90%, the
second and third LED illuminate. The third LED illuminates if the
battery charge is between 33% and 66%.
If any Battery Charge LEDs are red, see pages 34 and 35 for more
information.
Powerware 5119 Rack Mount User's Guide
®

AC Input LEDs

Normal Utility Input (Buck and Single Boost)
Double Boost is on
Figure 15. AC Input LEDs (Normal Mode)

Battery Charge LEDs

>90% 66-90%
Figure 16. Battery Charge LEDs (Normal Mode)
:
www.powerware.com
33-66%
Operation
15