Page 17
CZ Infrared
Heater Specifications
™
Model CZ‐1000F
Cabinet: All Metal –22 & 24 gauge
Weight: 13.0 lbs
5
Dimensions: 16" x 12
/
" x 4" (H,W,D)
8
Power Requirements: 120 Volt AC —1000 Watt.
Power Supply: Requires isolated 12 gauge wire to
fuse panel.
Chassis Safety Insulation: Exceeds all government
and independent laboratory standards for safety
in an installed heating appliance (a safety standard
that exceeds other manufacturer's specifications).
Internal ceramic blanket provides R45 insulation
between the wall and the heater. The heater cabinet
installed in the wall remains cool to the touch while delivering warm (160° F)
infrared heat into the room.
Life Expectancy: CZ Infrared heaters—25 years+.
Thermostat Power Requirement: None. The unit contains its own low voltage
power supply for thermostat operation.
Thermostat Type: Any 12‐24 volt low‐voltage thermostat (not supplied).
Zoned Heat Capability: Pre‐wired. Simple two‐wire contact to any zone control
panel—can also accept multiple parallel hook‐ups to a single low‐voltage
thermostat.
Safety Cut‐Off: Yes.
Listed Approvals: CTUV‐US & International (UL Equivalent).
Installation: Any wall with a minimum 3 ½ inches of depth.
Heat Type: Therapeutic far‐infrared heat.
Heat Chamber copper lined for maximum ion transfer.
Heating Elements: Two (2) ceramic infrared emitters 500 w., 500 w.
Ceramic Life Expectancy: Rated at 40,000 hours.
Heat Output: 4,800 BTU infrared heat.
Fan System: Three (3) high volume, low noise 90mm DC fans.
Frequency Hum: There is no AC 60Hz frequency hum as with other in‐wall systems.
Fan Noise Level: 18 dB—practically silent.
Warranty: Limited 3 Year P & L. 5 Year—ceramic emitters.
Customer/Warranty Service: (800) 595-9605
Patent pending coverage of more than 30 distinct features in the CZ Infrared™
heater are what makes the CZ Infrared™ technology a truly unique energy
efficient heat source for your home or office.
Flexible Size & Voltage Applications
CZ Infrared™ heating systems come in 120 volt units for new construction. The
120 volt units are designed to be retrofitted to existing installations where only
120 volt circuitry is available.
CZ Infrared™ heaters come in two sizes: 1000 watts for conventional room
heating and 500 watts for bathrooms, hallways and closets.
CZ-1000F
Quality Assurance
CZ Infrared™ heating systems come with C‐TUV‐US certifications with
equivalent approvals both in UL and CSA classifications. CZ Infrared™ heaters
are manufactured in Taiwan and China by EarthWise Electronics, Inc.
CZ‐1000F ‐ 1000 watts
CZ‐500F ‐ 500 watts
©2009 EarthWise Technologies, Inc
Page 6