Table of Contents
Advertisement
Quick Links
CZ Infrared Heaters
Green Technology for a Modern World
North American Distribution and Sales
EarthWise
Technologies, Inc
18324 Cook Road, Suite 6
Yelm, Washington 98597
Customer/Warranty Service:
(866) 446‐2864
bearthwise.com
Earthwise
Technologies, Inc
CZ Infrared
™
by EarthWise.
Feel the Difference.
CZ Infrared
Owner's Manual
Therapeutic infrared heating systems for a green, healthy environment
Flush Mounting Series
Models CZ‐1000F / Model CZ‐500F
Save these instructions
Includes:
Application Guidelines
Installation Guidelines
User Information & Guidelines
Operating Instructions
Warranty & Servicing
Notice: This unit requires a conventional low‐
voltage thermostat to be supplied by the
customer.
A low voltage thermostat, such as a Honeywell
Model CT8775, or RTH5100, or equivalent must be
installed in conjunction with this unit.
™
Advertisement
Table of Contents
Summary of Contents for Earthwise Technologies CZ Infrared CZ-1000F
-
Page 1: Save These Instructions
Earthwise Technologies, Inc CZ Infrared ™ by EarthWise. Feel the Difference. CZ Infrared Heaters Green Technology for a Modern World CZ Infrared ™ Owner’s Manual Therapeutic infrared heating systems for a green, healthy environment North American Distribution and Sales Flush Mounting Series Models CZ‐1000F / Model CZ‐500F EarthWise Save these instructions Technologies, Inc Includes: Application Guidelines 18324 Cook Road, Suite 6 Installation Guidelines Yelm, Washington 98597 User Information & Guidelines Operating Instructions Customer/Warranty Service: ... - Page 2 Warranty Claim Procedure To obtain warranty service, you must: 1. Provide proof of purchase in the form of a Bill of Sale or receipted invoice to show evidence that the unit is within the warranty period or valid serial number to document manufacture date, which ever is the former date will be honored by EarthWise Technologies in lieu of proof of purchase. 2. Contact the Dealer you purchased your equipment from for additional instruction. For more information, or for additional assistance, please call or write: EarthWise Technologies, Inc. 18324 Cook Road, Suite 6 Yelm, Washington 98597 Customer/Warranty Service: (800) 595‐9605 CZ Infrared™ Ceramic Infrared In‐Wall Heater CZ‐1000F (Flush Mounting) Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc...
-
Page 3: Table Of Contents
CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, OR MEDICAL EXPENSES CAUSED BY ANY DEFECT, FAILURE, MISUSE, OR MALFUNCTION OF THE PRODUCT. Some jurisdictions do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... -
Page 4: Why Use Cz Infrared™ Infrared Heat
IR and Sensor Case Top I Solid state relay the infrared wave in order to optimize the efficiency and savings produced by V Romax Wiring box J High Heat Sensor W IR Retaining clip using an infrared heating source. This design advantage eliminates the need K Fan Sensor X Rear baffle assembly Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... -
Page 5: Energy Saving Benefits
Baffle D Grill vented through the ceiling to economics and save on construction costs, the N Heat Resistant Insert E Fan Holder heat remains on the ceiling and must be pushed to floor with ceiling fans. This O Solid state relay F Fans is not required with infrared heat. P Connection Plate G Insulator Cover H High Limit Reset I Top Case Bracket Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... - Page 6 Heat Chamber copper lined for maximum ion transfer. contrast the walls. Heating Elements: One (1) ceramic infrared emitter 500 w. Patented Proprietary Technology Ceramic Life Expectancy: Rated at 40,000 hours. CZ Infrared™ heaters contain a proprietary high‐efficiency, ceramic infrared Heat Output: 2,800 BTU infrared heat. emitter ( or heating element) which produces more infrared heat per kilowatt Fan System: One (1) high volume, low noise 90mm DC fan. than conventional ceramic. quartz, or carbon plates. Frequency Hum: There is no AC 60Hz frequency hum as with other in‐wall systems. Fan Noise Level: 18 dB—practically silent. Warranty: Limited 3 Year P & L. 5 Year—ceramic emitters. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc...
- Page 7 Installation: Any wall with a minimum 3 ½ inches of depth. Quality Assurance Heat Type: Therapeutic far‐infrared heat. CZ Infrared™ heating systems come with C‐TUV‐US certifications with Heat Chamber copper lined for maximum ion transfer. equivalent approvals both in UL and CSA classifications. CZ Infrared™ heaters Heating Elements: Two (2) ceramic infrared emitters 500 w., 500 w. are manufactured in Taiwan and China by EarthWise Electronics, Inc. Ceramic Life Expectancy: Rated at 40,000 hours. Heat Output: 4,800 BTU infrared heat. Fan System: Three (3) high volume, low noise 90mm DC fans. Frequency Hum: There is no AC 60Hz frequency hum as with other in‐wall systems. Fan Noise Level: 18 dB—practically silent. Warranty: Limited 3 Year P & L. 5 Year—ceramic emitters. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc...
-
Page 8: Unpacking Your New Cz Infrared Heater
In lieu of overall engineering calculations and thermal loss calculations, a general rule of thumb can be applied to determine the number of units to be First, push the reset button. Next, check installed: the thermostat leads & listen to determine Heater does not heat‐up if the first fan is operating. If so, call a Notes: Calculate 4‐6 hours of running time per day per heater installed to calculate Btu’s service technician for installation of a new and electrical energy cost. Also, remember that multiple unit installations in larger rooms heat relay. can be coupled to the same low‐voltage thermostat or regulated separately. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... -
Page 9: Installation Instructions
6 ft. above the floor to eliminate obstructions to air flow. The control and one of the lead wires to the thermostat from the thermostat contact on the heater can be mounted lower if preferred. The higher location of the heater heater. also insures that obstacles in the room such as furniture will not encumber the Maintenance circulation of the infrared heat waves being generated from the heater. This assures even heat distribution and prevents cold‐pockets of air. The infrared heat will flow evenly from floor to ceiling so the location of the heater on the Routinely inspect the air registers on the infrared unit to make sure that there is no dust wall is not pre‐empted by normal in‐wall heater considerations. accumulation. Vacuum as you would any conventional heat or air conditioning duct. It is suggested that an annual dusting of the ceramic plates be performed in order to Note: Each CZ Infrared™ heater comes with two sets of mounting brackets. One eliminate any residual accumulation of dust during the summer months. Other than set is for mounting the unit prior to sheet rock installation, and the second set is this, there are no maintenance requirements involved. In order to accomplish this, the for mounting the unit after sheetrock installation, as in the case of a remodel. front plastic panel must be removed by removing the four screws and lifting up to release the panel from the top clip. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... -
Page 10: Wiring Diagrams
Page 9 Mounting Guidelines (CZ-1000F) Wiring Diagrams CZ‐1000F New Construction Installation BLUE WHITE OPTIMAL SITE OPTIONAL SITE CZ‐1000F Wiring Schematic * Switch must be having a contact separation in all poles that provide full disconnection with a Heater must not be located immediately below a socket‐outlet. contact separation of at least 3 mm and rated 10A minimum. Use the following mounting brackets for heater installation prior to sheetrock installation. Use the new construction brackets as shown. Attach the heater unit to the BLUE wall, 6 ft. (1.8 m) or higher above the floor to the bottom of the heater unit. The higher the better. The higher location of the heater insures that obstacles WHITE in the room such as furniture will not encumber the circulation of the infrared heat waves being generated from the heater. This assures even heat CZ‐500F Wiring Schematic distribution and prevents cold‐pockets of air. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc... - Page 11 This assures even heat distribution and the low voltage thermostat being used is compatible with the 12 volt DC voltage originating from the yellow and white thermostat wires from the heater. The prevents cold‐pockets of air. thermostat should be located at least 5 feet from the location of the in‐wall heater. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc...
- Page 12 existing construction. Use the following mounting brackets for heater installation prior to sheetrock installation. Use the retrofit brackets as shown. Attach the heater unit to the wall, 6 ft. (1.8 m) or higher above the floor to the bottom of the heater unit. The higher Use the new construction brackets as shown. Attach the heater unit to the the better. The higher location of the heater insures that obstacles in the room wall, 6 ft. (1.8 m) or higher above the floor to the bottom of the heater unit. such as furniture will not encumber the circulation of the infrared heat waves The higher the better. The higher location of the heater insures that obstacles being generated from the heater. This assures even heat distribution and in the room such as furniture will not encumber the circulation of the infrared prevents cold‐pockets of air. heat waves being generated from the heater. This assures even heat distribution and prevents cold‐pockets of air. Customer/Warranty Service: (800) 595-9605 ©2009 EarthWise Technologies, Inc...