Input Controls; Bass Controls; Tweeter Controls - Adam S3X-H Operation Manual

Hide thumbs Also See for S3X-H:
Table of Contents

Advertisement

Available languages

Available languages

4. Speaker Adjustment
4.3

Input Controls

There are two different controls to regulate the overall input
sensitivity:
One control allows for coarse settings from -20dB to +8dB. The
control works in 4dB steps.
The other control is intended for fine tuning in 0.5dB steps,
ranging from -1.5dB to 2dB.
4.4

Bass Controls

There are two different controls to regulate the lower
frequencies:
The EQ 80 Hz control is an equalizer to boost bass response.
The <150 Hz control is a shelf filter that allows to progressively
raise or lower the frequencies below 150 Hz (see Fig.).
4.5

Tweeter Controls

There are two different controls to regulate the high frequency
range above 6 kHz:
The Gain control alters the input sensitivity within ±2dB (0.5dB
steps).
The >6 kHz control is a shelf filter that allows to progressively
raise or lower the frequencies above 6 kHz (see Fig.).
10
Room EQ <150 Hz for low
frequencies below 150 Hz
Room EQ >6 kHz for high
frequencies above 6 kHz

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S5x-vS5x-h

Table of Contents