Recording Tv Programmes Using The Video Plus+ System - Sony RDR-GX7 Operating Instructions Manual

Recording TV programmes using the
VIDEO Plus+ system
The VIDEO Plus+ system is a feature that simplifies setting
timer recordings. Just enter the PlusCode number listed in the
TV programme guide. The date, time, and programme position
of that programme are set automatically.
Check that the channel is correctly set in "Channel Setting" in
"Settings" (page 75).
Z
Number
buttons
CLEAR
[TIMER]
RETURN
a Press }/1.
b Turn on the TV, and switch the input selector
on your TV so that the signal from the
recorder appears on the TV screen.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the
appropriate channel so that you can hear sound from
the recorder.
c Press Z, and place a recordable disc on the
disc tray.
d Press Z to close the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If you use an unused DVD, formatting starts
automatically.
When using an unused DVD-RW, select the
recording format, VR or Video.
e Press [TIMER].
The Timer programming (VIDEO Plus+) menu
appears.
If the Timer programming (Standard) menu appears,
press < to switch the display.
f Press the number buttons to enter the
PlusCode number, then press SET.
Press CLEAR and re-enter the correct number.
"/1
Press M/m to select "Cancel," then press ENTER.
g Press M/m to select "OK," then press
ENTER.
SET
The date, start and stop times, programme position or
station name, recording mode, and PDC/VPS setting
appears. For details about the PDC/VPS function, see
page 26.
</M/m/,,
ENTER
x REC STOP
A Press </, to select the item you want to
B Press M/m to change the setting.
To cancel the setting, select "Cancel."
To re-enter the PlusCode number, select "Change."
h Press </M/m/, to select "OK," then press
ENTER.
The TIMER REC indicator lights up on the front
panel, and the recorder is ready to start recording.
i Press RETURN to turn off the display.
To record from a decoder or other source, leave the
connected equipment turned on.
To stop recording during timer recording
Press x REC STOP.
If the timer settings overlap
See page 27.
To confirm, change, or cancel timer recording
See "Checking/changing/cancelling timer settings (Timer List)"
(page 28).
Timer - VIDEO Plus+
Set the timer by entering the timer code.
PlusCode No.
Standard
If you make a mistake
To cancel the setting
Timer - VIDEO Plus+
Is the follwing timer setting correct? To modify,
adjust each item or re-enter the timer code.
PDC
Date Start Stop Prog. Mode
VPS
Mon 28.6 10 : 00 11 : 30 AAB HQ Off
If you want to change the setting
change.
Cancel
OK
Cancel
Change
,continued
29
Timer Recording