EYEZONE B1080PX-2 User Manual

High-class digital signage with high-end performance (40mbps)

Advertisement

Quick Links

EYEZONE B1080PX-2

User Manual

J u l 2 9 , 1 0
FCC Notices
It's herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generated uses and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio of television reception, which can be determined by turning the
equipment off or on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
CE Declaration
This product has been assessed against the following Applicable Standards.
EN 55022:2006/A1: 2007(Class B)
EN 61000-3-2: 2006
EN 61000-3-3: 1995/ A1:2001/ A2:2005
Printed in Taiwan R.O.C.
All contents are subject to change without notice.
All trademarks are the property of their respective owner.
1
2
EN 55024: 1998/ A1:2001/ A2:2003
IEC 61000-4-2: 1995/ A1:1998/ A2:2000
IEC 61000-4-3: 2006
IEC 61000-4-4: 2004
IEC 61000-4-5: 2005
IEC 61000-4-6: 2006
IEC 61000-4-8: 2001
IEC 61000-4-11: 2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B1080PX-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EYEZONE B1080PX-2

  • Page 1: User Manual

    FCC Notices EYEZONE B1080PX-2 It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. User Manual This device must accept any interference received, including interference that may cause undesired operation.
  • Page 2: Table Of Contents

    10. Schedule Function……………..…..……..……….………….. 33 10.1 Install the Schedule Software…….……..……………….. 33 The B1080PX-2 is a full HD digital signage that plays media files from CF memory card 10.2 Start the Schedule Software…..……………...………….. 34 without a computer. The media files can be automatically updated at the specific time from an FTP 10.3 Apply the Schedule on the B1080PX-2…………..……..
  • Page 3: Features

    Supports Auto Key Lock Function Exports the Configuration Value: You can export the configuration value to the CF card. The configuration value can be modified on your PC, and can be applied to the B1080PX-2 or others. Supports FTP Auto Download Function: Connect to Remote FTP server and download data to the CF card automatically.
  • Page 4: Remote Control

    Status 1: If the “AUTOPLAY (Movie/ Picture/ All Files)” function is enabled and there are Open the setup menu Mute sound media files on the CF card or the B1080PX-2 is already connected to the display device, the OSD display function on/ off B1080PX-2 will auto play media files after power on.
  • Page 5: Setting Up

    Assign IP Address: If the B1080PX-2 is connected to a network without a DHCP server or you 7. SETTING UP want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and DNS for the B1080PX-2. In the main menu, using the “▼” button on remote control to select the “SETUP” item, and then PS.
  • Page 6 With the bundle tool “IP Detect”, user could search B1080PX-2 on the local area network. User could area network. also change the IP setting via this tool. For example, user might assign a static IP to B1080PX-2 by the steps as below: Step1: Insert the driver CD into your CD-ROM drive, then the autorun function will start up the shell program.
  • Page 7: Ftp Setup

    Step6: The default IP mode of B1080PX-2 is DHCP. User should change the mode to “Manual”, if he 7.2 FTP SETUP wants to assign a static IP address to B1080PX-2. Then enter the preferred “IP”, “Net Mask” and “Gateway” in the “Network Setting”. Finally, click on the “Setup” button for completing the setting.
  • Page 8: Video Setup

    Local HTTP Server: Enable/ Disable the HTTP command function. Moscow, Saint Petersburg, (GMT-10:00) Hawaii (GMT+03:00) Volgograd Local HTTP Server Setup: To set the “Port”, “User ID” and “Password” of the B1080PX-2. (The (GMT-09:00) Alaska (GMT+03:00) Baghdad Default Port: 80, User ID: root, Password: admin) Pacific GMT (U.S.
  • Page 9: Other Setup

    B1080PX-2, the B1080PX-2 will apply the new settings automatically. All Files: Auto play all files (movie and picture files) on the CF card after power on. Play Button: Only for used with play buttons. The B1080PX-2 supports two options (Repeat Off: Turn off the Auto Play function.
  • Page 10: Using The B1080Px-2

    8.1 PLAY MEDIA FILES ON THE CF CARD is playing. With the “+ VOLUME –” button. Step 1: Insert the CF card with media files, then turn on the B1080PX-2 and press the “ENTER” button - First Press: Adjust the brightness.
  • Page 11: Ftp Auto Download Function

    PAUSE/STEP: Pause the playback or play frame by frame. 8.2 FTP AUTO DOWNLOAD FUNCTION ZOOM: Zoom in/ out on the movie or picture. Step1: Use the “Notepad” to create a commands file on your PC as shown below (you can refer to the sample file (d0013fe100000) on the provided CD): Original Size First Press:ZOOM 01...
  • Page 12 Step2: Remember to save the file after editing, and named the command file d + MAC address.txt. Item Description Example: The MAC address of B1080PX is 0013fe100000, and named the file d0013fe100000.txt. [file] Enter the filename you want to download. NOTE: The MAC address of B1080PX will be displayed in the setup menu.
  • Page 13: Rs-232 Function

    Step3. The log file (.txt) can be viewed on your PC using WordPad. Step2: Make sure the RS232 function is enabled (refer to section 7.4). Step3: Use the tool “Tera Term” or other tools to control the B1080PX-2 with ASCII command. - The available baud rate is “19200”.
  • Page 14: Http Command Function

    Confirm the “Local HTTP Server” function has been enabled, and the “Local HTTP Server Setup” set has been completed (refer to 7.2). Set your router or firewall, and open a port 80 for the B1080PX-2. The following figure is an example, please refer to your user’s manual of router for opening ports.
  • Page 15: Network

    Key/ Passphrase: The key you enter here must match the password of the device exactly. FTP Server Address: Click on the address to directly connect to the B1080PX-2 server. Enter the user name and password (Default User Name: root, Default Password: admin) to log on. After logging on all the media files on the CF card will be listed.
  • Page 16: Time

    Port: Enter the port of the B1080PX-2 (default port: 80) Time Zone: Set the time zone of your location. User ID: Enter the user name of the B1080PX-2 (default ID: root). Password: Enter the password of the B1080PX-2 (default password: admin).
  • Page 17: Schedule Function

    10. SCHEDULE FUNCTION 10.2 START THE SCHEDULE SOFTWARE You might double click the “Schedule Maker” icon on your desktop for opening the “Schedule NOTE: The “NTP Server” or “Local Time” must be set before using the Schedule Generator”. Or you might click on <Start> → <Programs> → <Schedule Maker 20090217> → < Function.
  • Page 18: Advance Schedule

    Remove: Click this button to remove the file from the list. NOTE: Do not rename the file (schedule.ini), otherwise the B1080PX-2 will not be able to read the file. Select the file that you want to remove from the list, and press the “Remove” button to delete.
  • Page 19: Apply The Schedule On The B1080Px-2

    Step 4: After finishing all setup, press the “SAVE” button and a pop-up window will appear. Select the path, then click the “SAVE” button to save. NOTE: Do not rename the file (schedule.ini), otherwise the B1080PX-2 will not be able to read the file. 10.3 APPLY THE SCHEDULE ON THE B1080PX-2 Put the “schedule.ini”...
  • Page 20: Optional Auxiliary Equipment

    There are 6 demo files on the CF card. The file names are a01.xxx, 33.xxx, b55.xxx, 1abc.xxx, 07.xxx Step 2: Insert the CF card to the B1080PX-2, and the B1080PX-2 will play the default file automatically and A01.xxx. ( xxx is extension of the file ) while powered on.
  • Page 21: Troubleshooting

    Make sure the file format on the CF card is correct. 11.2.4 Play the Demo Files Check if the display device is switched to correct video input Step 1: Insert the CF card to the B1080PX-2, and the B1080PX-2 will play the default file automatically source. while powered on.

Table of Contents