6.1 SLIDE SETUP……………………………………..…. 6.2 MUSIC SETUP…………….………………………… 6.3 MOVIE SETUP…………….………………………… 6.4 SLIDESHOW SETUP…………….……………………. 6.5 PREFERENCE……………….………………………… 6.6 TIMER FUNCTION…..…….………………………… 7. Using the P102-1/ 2.………………………………………... 7.1 Play Picture File……………………………………..…. 7.2 Play Music File……….………………………………… 7.3 Play Movie File……………..………………………..… 7.4 File Library…………………………….…….……….… 10 7.5 Hot Key……….………………………………….…….. 10 8.
4. S-Video Cable 2. INTRODUCTION The Eyezone P102-1/ 2 is a digital signage that plays picture, music and video without a computer. It uses media files from CF, SD, MMC and MS (Pro) memory card and displays them on a 10.2” TFT-LCD with audio-out from the built-in speakers. It also has S-Video and Audio input as for the display.
5. REMOTE CONTROL 6. SETTING UP Press the “SETUP” button on the remote control to open the “SETUP MENU – MAIN PAGE” shown in the following Power on/ off figure. There are five groups of sub-menu in the setup menu. Mute sound 、...
6.4 SLIDESHOW SETUP 6.6 TIMER FUNCTION (only for P102-2) SLIDESHOW MODE: : : : Set the slideshow to start automatically. NOTE: : : : Make sure the insulating slice has already been taken out. FOLDER REPEAT: : : : Set all files (picture, music or movie) in the folder to show only once or continuously (loop).
7.2 PLAY MUSIC FILE 7. USING THE P102-1/ 2 Step 1: Press the “MUSIC” button on the remote control from any menu. Copy files (music, picture and movie) to the memory card first. 7.1 PLAY PICTURE FILE Step 1: Press the “SLIDE” button on the remote control from any menu.
7.3 PLAY MOVIE FILE 7.4 FILE LIBRARY Step 1: : : : Press the “FILE” button on the remote control from any menu. Step 1: Press the “MOVIE” button on the remote control from any menu. Step 2: : : : You can see all the files (including picture, music and movie) on the left panel of the “FILE Step 2: The preview mode will show all the video files on the memory card.
2. If the card does not insert easily, check the direction. Memory card 3. Confirm format of the card. P102-1/ 2 supports CF, SD, MMC and MS (Pro) memory card. 1. Check if the mute function is on. No sound 2.