Basic Features - Gateway ALR 7200 User Manual

10 Gateway ALR 7200 User's Guide

Basic features

•
Intel Pentium
•
SMP design supporting up to two processor modules; Intel MP
Specification V1.1 and 1.4 compliant
•
32-bit PCI and 16-bit ISA bus master; 64-bit processor and
memory data path; extended PCI-to-PCI bridge support
•
32-MB Error Checking and Correcting (ECC) synchronous
dynamic random access memory (SDRAM), expandable to 1-GB
using ECC 60-ns 72-bit SDRAM DIMMs
•
Integrated 2-MB DRAM PCI Graphics (Cirrus Logic GD54M30)
•
Seven expansion slots: five PCI, one shared PCI/RAID port, and
one shared PCI/ISA.
•
Integrated dual channel PCI Ultra2 SCSI (Adaptec 7890) with two
68-pin connectors, dual-channel Ultra-DMA PCI IDE interface,
and floppy controller supporting 1.44-MB and 2.88-MB formats.
•
RAID port ready: the shared PCI/RAID port slot supports the
addition of a RAID port card to provide RAID capability.
•
Low voltage differential (LVD) support for SCSI devices. LVD
SCSI allows faster disk access and greater data integrity
•
Power supply unit that provides 300-W of DC power to internal
system components.
•
Phoenix upgradable Flash BIOS, Year 2000 Ready
•
The system is equipped with InforManager™ (IFM), a special
feature consisting of both hardware and software designed to
monitor and report the operating status of the system and its
devices: CPUs, power supplies, RAM, ambient temperatures,
voltages, and fan operation. For further information about the
InforManager™, refer to the InforManager™ User's Guide.
®
II processor (speed depends on the model)