Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER# button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
Viewing the HD
Connection Guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
"
MENU3
Setup
English
Connecting to an Antenna
Plug & Play (Initial Setup)
Press the
or
button, then press the ENTER button.
Select the desired OSD (On Screen Display) language.
Press the
or
button, then press the ENTER button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
Press the
or
button, then press the ENTER button. Select Air, Cable or Auto.
Press the
or
button, then press the ENTER button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel
Auto Program
✎
Press the ENTER button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time.
y The connection method for the best HD screen quality is displayed.
Press the ENTER button.
Plug & Play
ENTER
VHF/UHF Antenna
$QWHQQD &DEOH 1RW 6XSSOLHG
or
MENU
for 5 sec.
(p. 14).
Cable
ANT OUT
POWER
P
(p. 19).