Setup Menu - IBM PROJECTOR E400 User Manual

Setup menu

Follow the steps below to access the Setup menu.
1. Press the Menu button to open the OSD menu.
2. Press the cursor left/right button to move to the Setup menu.
3. Press the cursor up/down button to move up and down in the Setup menu.
The following table shows the options that you will see in the Setup menu and the
default.
5-6
IBM E400 PROJECTOR: User's Guide
Item
Menu Position
Menu Display
Translucent Menu
Cancel
Description
Press the cursor left/right
button to position the OSD
on screen.
Range: Left, Right, Center,
Down, Up
Press the cursor left/right
button to determine timeout
delay of OSD.
Range: 10 to 20 seconds
Press the cursor left/right
button to set menu screen
translucency.
Range: On/Off
Resets all Options screen
items to default values.
Default
Center
15
Off
N/A