Status Menu - IBM ILC200 User Manual

Status menu

This is a read-only window for informational purposes.
To display the status window, click Show status from the menu, and then click
the left or right navigation button. To close the window, click the left or right
navigation button.
Display
Lamp hours used
This shows how many hours the current lamp has been in use. The counter
starts at zero hours and counts each hour the lamp is in use. Change the bulb
when the brightness is no longer acceptable. See "Replacing the projection
lamp" on page 1-26 for details.
Computer resolution
This shows your computer resolution setting. To change this, go to your
computer Control Panel and adjust the resolution in the Display tab. See your
computer documentation for details.
1-24
iLV200/iLC200 IBM Data/Video Projector: User's Guide
A udio Image C ontrols
Lamp hours used
C omputer resolution
Horizontal refresh rate
Vertical refresh rate
Mute status
Source
Software version
Startup screen version
Boot version
Language Status
Show status
>
0039
1024x768
60.03 KHz
75.04 Hz
off
computer-analog
1.0
1.0
1.0