Additional Controls - Vais Technology SoundLinQ3 Owner's Manual

Additional controls

Settings Mode
Enable/Disable "Settings mode"- press the [SCAN] button 8 times (MUST BE DONE within 1-2 seconds).
You will hear a long beep.
Sound Level Adjustment
@ Enable "Settings mode"
@
Start playing desired song by pressing the [Play/Pause] button on the connected BT Audio Device
@
Activate "SCAN" function on the head unit
@
Set the desired volume on the head unit
@ While "SCAN" is active use [SCROLL UP] to increase volume and [SCROLL DOWN] to decrease volume.
@
Sound level [01..10] will be displayed as Seconds on the head unit.
@
Deactivate "SCAN" function
Disable "Settings mode"
@
NOTE: Remember, a high sound level may result in noticeable sound distortion.
Activate / Deactivate "Disc Switching Fix" Function
"Disc switching Fix" has been designed to avoid a Radio malfunctioning in some vehicles while navigating through disc
selection. SL3B comes with this feature activated by default, and it can causes screen to go black for 0.5 sec -1.5 sec in
between disc selection. It doesn't have to be ON for all vehicles. Users are welcome to turn this feature OFF to determine
wether or not it actually needs to be ON or OFF for their vehicles.
@
Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2
seconds).
@
Push DISC RANDOM button to hear a long beep to toggle the "Disc Switching Fix" Function ON and OFF.
vehicles not equipped with DISC RANDOM as a physical button, push and hold the REPEAT button until you hear a
long beep to toggle the "Disc Switching Fix" Function ON and OFF.
@ Disable "Settings mode"
Activate / Deactivate "I Agree" Automatic Bypass Function
@
Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2
seconds).
@
Push DISC REPEAT button to hear a long beep to toggle the "I Agree" Automatic Bypass Function ON and OFF.
(For vehicles not equipped with DISC REPEAT as a physical button, push and hold the REPEAT button until you hear
a long beep to toggle the "I Agree" Automatic Bypass Function ON and OFF.
i
IMPORTANT
!
(1) After a delay of five seconds, this product will automatically bypass the automobile
manufacturer's on-screen warnings concerning use of the onboard navigation system.
These warnings are: "Caution, Drive safely and obey traffic rules. Watching this screen while
vehicle is in motion can lead to a serious accident. Make selections only while stopped. Some
map data may be incorrect. Read safety instructions in Navigation Manual."
(2) PLEASE PRE-NOTIFY EVERY DRIVER OF THIS VEHICLE OF THE
CONTENT OF THE AUTOMOBILE MANUFACTURER'S WARNING.
(3) IF YOU PREFER THAT THIS PRODUCT NOT ELIMINATE THE FOREGOING
WARNINGS, YOU MAY DISABLE THIS FEATURE BY FOLLOWING THE
INSTRUCTIONS IN THIS OWNER'S MANUAL, OR REFER TO INSTRUCTIONS
AVAILABLE ON THE MANUFACTURER'S WEBSITE
Important Please Read!
WWW.VAISTECH.COM
17
(For
!
.