Source Selection; Functionality Description - Vais Technology SoundLinQ3 Owner's Manual

Head Unit Controls

Source Selection

Select desired source by pressing DISC button on the head unit or MODE on the steering wheel control.
(See diagram below)
Head Unit:
To switch between the unit sources you need to use "DISC" or "CD" button on the radio
(Diagram below assumes factory CD changer is present).
CD
Steering Wheel control:
To switch between the unit and radio you need to use the "MODE" button on the steering wheel control.
(Diagram below assumes following sources are present).
Control of connected Bluetooth Streaming Device is done through your head unit or the steering wheel controls (explained
below).
This unit can be programmed in CD changer emulation mode , MD changer emulation mode and CD-MP3 Emulation.
Please see attached chart to determine which emulation mode is compatible with your vehicle.
MD changer emulation
CD/MD Changer Emulation
CD1 CD CD1
SL3B SL3B
AM FM1 FM2

Functionality Description

For Radio Receiver with LCD
MD-TEXT
For Radio Integrated into Navigation System
Radio Integrated into Navigation System
Direct disc selection
MAY NOT be available for all vehicle model.
Applicable for iOS integration ONLY.
CD MD1
OR
SL3B
TAPE CD CD1
SL3B
CD changer emulation
For Radio Receiver with LCD
For Radio Integrated into Navigation System
Radio Integrated into Navigation System
CD-Text support
Song Title, Artist Name
or Album Name
(see "DISC SCAN" function)
CD MD1
SL3B
Playlist Title
10