Status Menu Error Codes - Epson WF-7610 User Manual

Status Menu Error Codes

If a job does not complete successfully, you can check the error code. Press the Status button, select
Job History, and locate the incomplete job. Select the job to display the error code and additional
information.
Code
001
109
110
201
202
203
204
205
206
207
208
301
401
302
402
Condition/solution
The product was turned off by a power failure.
The received fax was already deleted.
The job was printed 1-sided because the loaded paper does not support 2-sided printing.
The product's memory is full.
You can send pages individually or print received faxes and then delete them to free up
memory space.
The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
The product cannot detect a dial tone.
Make sure the phone cable is connected correctly and the phone line works. If you
connected the product to a PBX (Private Branch Exchange) phone line or Terminal
Adapter, turn off the Dial Tone Detection setting.
The recipient's fax machine is busy. Wait a moment, then try again.
The recipient's fax machine does not answer. Wait a moment, then try again.
The phone cable is incorrectly connected to the product's LINE and EXT ports. Connect
the phone cable correctly.
The phone cable is not connected. Connect the phone cable.
The fax could not be sent to some of the specified recipients.
Print a fax log to check which recipients failed to receive the fax. You may be able to
resend a fax from Job Monitor in the Status Menu.
There is not enough storage space available on the external memory device. Clear space
on the device or use a different device.
The external memory device is write-protected; disable write protection.
260