Setting The Number Of Rings To Answer - Epson WF-7610 User Manual

Setting the Number of Rings to Answer

If you connect an external answering machine and select to receive faxes automatically, make sure the
Rings to Answer setting is correct. The number of rings should be higher than the number of rings your
answering machine is set to for answering a call.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the
2. Select
3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Scroll down and select Fax Settings.
5. Select Receive Settings.
6. Select Rings to Answer .
You see this screen:
7. Select the number of rings and select OK. Make sure to select a number higher than the number of
rings your answering machine is set to for answering a call.
Note: The answering machine picks up every call faster than the product, but the product can detect fax
tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has
started receiving the fax, then hang up.
Parent topic:
home button, if necessary.
Setup.
Setting Up Fax Features Using the Product Control Panel
167