Introduction - NOBOCOOL NC-42CP User Manual

INTRODUCTION

This portable air conditioner can alter the room temperature and humidity. It has multiple functions of cooling,
dehumidifying (drying) and fan ventilation, and can be moved from room to room and transported from building to
building easily.
The air conditioner can maintain indoor air temperatures between 18°C and 32°C.
GUIDELINES FOR OPTIMISING COOLING EFFECTIVENESS
NOBOCOOL portable refrigerated air conditioners have an independently tested cooling capacity of 4200 watts (4.2kW)
or 15,000 BTU. This is sufficient to cool rooms up to a maximum of 34 square metres in floor area.
The maximum effective room size is influenced by several factors including the amount and type of insulation,
orientation of the room to the sun, amount of glass areas, type of curtains and ceiling height etc.
•
The air conditioner is not designed to cool large open areas. Close all doors and windows in the room being
cooled.
•
Do not place the air conditioner in direct sun light. Close all curtains in the room being cooled.
•
For maximum cooling (COOLING MODE), set the temperature at 18 ° C and the fan at HIGH. After
approximately 3 minutes, the compressor will turn on (indicated by the green LED marked
and cooled air will come out of the air outlet. Cooled air will only come out of the air outlet when the LED on the
control panel is illuminated.
•
In COOLING MODE the air conditioner will not cool unless the set temperature is below the existing room temperature.
•
In COOLING MODE once the existing room temperature reaches the set temperature, the fan continues operating
and the compressor switches on and off to maintain the set temperature within the room.
•
Keep the exhaust hose as short and straight as possible.
•
Make sure the air intake and outlet grills are unobstructed.
•
Clean the filters at least once every two weeks.
3
on the control panel)
NOBOCOOL NC-42CP/C